Water tank
1
2.
Safety Precautions
Before
Use
1
06
Ground wire
Use a dedicated socket for this
unit,otherwise malfunction may
occur.
The power supply to the unit must
be grounded.
Don't run the heat pump unit
with water temperature lower
than 20
℃
.
Do not touch the power plug with
wet hands.Never pull out the pulg
by pulling the power cable.
Water or any kind of liquid is strictly
forbidden to be poured into the
product, or may cause creepage or
breakdown of the product.
When running the unit, never cover
the product with clothes, plastic
cloth or any other material that
block ventilation on the product,
which will lead to low efficiency or
even non-operation of this unit.
Main
Power Cable
RCD
Indoor
unit
It is mandatory to use a suitable circuit
breaker for the heat pump and make
sure the power supply to the heater
corresponds to the specifications.
Otherwise the unit might be damaged.
Disposal of Scrap Batteries ---
Please discard the batteries as sorted
municipal waste at the accessible
collection point.
Installation of a residual current device
(RCD) having a rated residual
operating current not
exceeding
30 mA is advisable.
ON
OFF
City water inlet
Connect to water tank
Min. 0.1 Mpa
Max. 0.25 Mpa
The maximum inlet water pressure, in pascals: 0.25Mpa.
The minimum inlet water pressure, in pascals, if this is necessary for the correct operation of the appliance: 0.1Mpa.
