63
ecotwin
COSMOGAS
8 - USE
Parameter
Permission
level
U.M.
Range
Factory setting
Costum
value
P0 speed setting in heating operation
(Don’t change)
Installer
/
- High speed,
- Medium speed,
- Low speed.
High speed
P0 speed setting in cooling operation
(Don’t change)
Installer
/
- High speed,
- Medium speed,
- Low speed.
High speed
P0 speed setting in DHW operation
(Don’t change)
Installer
/
- High speed,
- Medium speed,
- Low speed.
High speed
Air purge - heating / cooling circuit (N/A)
/
Selected - Not selected
Not selected
Air purge - DHW circuit (N/A)
/
Selected - Not selected
Not selected
8.2.12 - ELECTRIC LOCK
The menu consists of several pages and, by scrolling with the
arrows, it is possible to consult and modify all the parameters
relating to the lock function:
Parameter
Permission
level
U.M.
Range
Factory setting
Costum
value
Electrical utility lock (N/A)
End user
/
Selected - Not selected
Not selected
Electrical utility lock signal (N/A)
Installer
/
- Normally open,
- Normally close
Normally open
HBH during electrical utility lock (N/A)
End user
/
Selected - Not selected
Selected
P0 during electrical utility lock (N/A)
End user
/
Selected - Not selected
Not selected
Heating ECO operation
Installer
/
Selected - Not selected
Not selected
Outdoor temp. to start heating ECO operation
Installer
°C
-20...43
-20
Tw sensor dropped from its position (N/A)
End user
/
Selected - Not selected
Not selected
Signal for cutting outdoor unit power supply (N/A)
End user
/
Selected - Not selected
Not selected
Constant power supply for outdoor unit below (°C)
(N/A)
Installer
°C
-5...25
-2
Figure 8-19 - Electric lock icon
