9
3.6 - Preparing to
install the water
heater
Take the support bracket (see figure 2)
and choose a position with proper
clearances, as per Figure 4.
CAUTION!!!
When choosing a
mounting surface for the heater. The
weight of the heater with water is
approximately 150 lbs (68 kg). Make
certain that the wall can support such
weight.
Secure the bracket to the wall. NOTE:
Screws MUST be screwed directly into
the 16" (406 mm) vertical studs
Place the template onto the support
bracket and make necessary hole or
holes for the discharge flue vent. (see
also chapters on venting systems).
Install the heater on the support bracket
and secure all of the connections.
3.7 - Installation
Template
The heater is provided with an installation
template to facilitate proper installation
alignments (See figure 3).
3 - INSTALLATION
Figure 2 - Support bracket
Figure 3 - Installation template
