3
- These instructions must be read prior to
installation. If the information in these
instructions is not followed exactly, a fire or
explosion may result, causing property
damage, personal injury, or death.
- Hazards and Your Safety - Hot Water Can
Scald!
Water temperature over
125°F
(52°C)
can cause severe burns instantly, or death
from scalds. Children, disabled, and elderly
are at highest risk of being scalded; see
instruction manual before setting temperature
at water heater! Feel water before bathing or
showering. Temperature limiting valves are
available, see manual.
- If there is a smell of gas:
Turn the gas cock
off - Air the room - Do not try to light any
appliances - Do not use any phone in your
building - Do not touch any electrical switch -
Extinguish any flames - Call immediately a
licensed authorized technician or your local
gas company - Follow the gas supplier’s
instructions - If you cannot reach your gas
supplier, call the fire department.
- If there is a smell of combustion products:
turn the unit off - Air the room - Call a licensed
authorized technician.
- Installation, alterations:
licensed authorized
personnel must carry out the installation,
calibration or alteration of the gas apparatus.
Flue gas ducts must
not
be modified in any
way. Any replaced part or packaging parts
should never be left within reach of children.
- Explosive products or easily inflammable
products
: do not keep, use or store explosive
materials or easily inflammable materials such
as Gasoline, Adhesives, Solvents, Paint
Thinner, Butane, Liquefied Propane, paper,
etc., in the same room as the heater.
- Maintenance:
the user, according to the
heater’s operating instructions, has to keep
the installation in good condition and
guarantee the reliable, safe operation of the
heater. At least once a year the user must
call in a licensed authorized technician for
routine maintenance, before using it for central
heating.
- Servicing Manual:
when the installation and
commissioning of the system has been
completed, the installer should instruct the
SAFETY INSTRUCTIONS
homeowner to save the installation manual
near the heater so that service technicians
may refer to it in the future.
-
Label all wires prior to disconnection
when
servicing controls. Wiring errors can cause
improper and dangerous operation. Verify
proper operation after servicing.
-
Do not use this appliance
if any part has
been under water. Immediately call a qualified
service technician to inspect the appliance and
to replace any part of the control system and
any gas control, which has been under water.
- In the event of a breakdown and/or malfunction
of the heater, turn off the unit and do not make
any attempt to repair it. The heater must be
serviced exclusively by a qualified technician.
If it is necessary to replace any components,
always use original spare parts. Failure to
comply with this requirement may compromise
the safety of the unit.
- This water heater must only be used for the
purpose for which it has been expressly
designed: heating of water for closed circuit
systems for the central heating of civil and
domestic buildings, production of domestic
and sanitary hot water for civil use.
- The manufacturer declines all liability,
contractual or otherwise, for damages resulting
from incorrect installation or use of the heater,
or from failure to comply with the instructions
provided by the manufacturer, or from non
compliance with the applicable local and
national regulations in force.
- For safety and environmental reasons, the
packing materials must be disposed of at the
appropriate sorted refuse collection centres.
- Should overheating occur or the gas supply fail
to shut off, turn off the gas valve service switch
to the heater.
