manualshive.com logo in svg

Cosman G4, Service Manual

Share
Download
Cosman G4 Service Manual Download Page 36

Cosman G4 Radiofrequency Generator Service Manual (SPI 

11291

 Rev A) 

 

9. One Touch Interface 

 
The One Touch interface is one of two user interfaces available for operation of the generator in 
Stimulation, Thermal RF, and Pulsed RF modes.  The other is Graphing interface (Section 8).  Choice of 
user interface is primarily a matter of user preference, since almost all generator functions are available in 
both interfaces.  The One Touch interface has the following distinguishing characteristics. 

• 

On-screen Start/Stop button

: An on-screen Start/Stop toggle button is available to enable and 

disable electrode output.  The mechanical Start and Stop buttons to the right of the Touch Screen 
are still fully functional, but do not need to be used.  

• 

 

Stimulation Incremental Controls

: When the Stimulation “Auto Ramp” setting is Off (see Sections 

9.1 & 9.1.2), Stimulation output is incremented and decremented using on-screen buttons, NOT that 
Output Control Knob. 

• 

Thermal and Pulsed RF Automatic Control

: Automatic output ramping (“Auto Ramp”) cannot be 

disabled for Thermal RF and Pulsed RF output unless Automatic Temperature Control is disabled 
(see Sections 9.2.2 and 9.2.4).  Manual output ramping using the Output Control knob can be 
enabled by setting “Auto Ramp” to Off in the Graphing interface (see Section 8). 

 
 
 
 

Touch Screen 

Stimulation Increment/Decrement Buttons

: 

Available on the One Touch Stimulation 
screen when Stimulation Auto Ramp = Off. 
 

Output Control Knob:

 

Manual output ramping in 
TRF & PRF mode if 
Set/Max Temp=Off.  
Disabled at all other times.
 

On-screen Start/Stop Button

:  

• 

Press “Start” to turn electrode 
output on. 

• 

Press “Stop” to turn electrode 
output off. 

Output On Indicator

:  

Illuminated when any 
electrode output is on

Front-panel Start Button:

Turn on electrode output 
when the Stimulation (Sec. 
9.1), Thermal RF (Sec. 
9.2), or Pulsed RF (Sec. 0) 
screens are displayed. 
 

Front-panel Stop Button:

Turn off electrode output 
 

Reference Ground 

Pad Connection (G) 

Electrode Output 

Connection 1 

Electrode Output 

Connection 2 

Electrode Output 

Connection 3 

Electrode Output 

Connection 4 

Section 9 

Summary of Contents for G4




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands