Cosen V2230NC, Instruction Manual

Page: 45 / 122

4 ‐ 11
No Item Function Description
4
Saw blade stop
Press this icon to stop the saw blade.
5
Work light ON/OFF Press this button to turn on the work light.
A solid yellow light bulb icon indicates the lamp has
been turned on.
Press again to turn the light off.
6
Coolant ON/OFF Press this button to turn on the coolant pump.
A solid yellow faucet icon indicates the coolant pump
has been turned on.
Press again to turn off the coolant pump.
7
Last cut function
ON/OFF
When the mode is selected, the blade will
automatically stop and the hydraulic system will shut
down (in 10 seconds) after the current cut is finished.
8
Left vise lock/unlock Press this button to lock/unlock left vise.
Lock the left vise and vise clamping light must be on,
otherwise blade will not start cutting.
9
Right vise lock/unlock Press this button to lock/unlock right vise
Lock the right vise and vise clamping light must be
on, otherwise blade will not start cutting.
10
Saw bow fast/slow
swiveling mode
When the slow mode is turned on, the saw bow
swiveling speed will dramatically reduce to help you
position the work piece precisely
11
System parameter
setting
Press this button to set up system parameters.
Password is required.
All parameters have been set up by the
manufacturer. In order to prevent random change
from being made to these parameters and affect
cutting precision and machine life, this function is
protected with a set of password.
12
Cutting status display
Press this button to display cutting ‐ related
information e.g. blade speed and blade life.
Information and parameter setups for optional
accessories such as blade deviation detector can also
be configured in this setup page.
Refer to Cutting Display & Setup in the following
page.