Cosen V2230NC, Instruction Manual

Page: 39 / 122

4 ‐ 5
When this button is pressed with the running blade, saw bow moves forward slowly. When this
button is pressed with the stopped blade, saw bow moves fast forward until the operator releases
the button.
4. Saw bow backward button
When the button is pressed, saw bow moves backward until the operator releases the button or until
the saw bow reaches the rear limit position.
5. Right vise clamp/release knob
Turn the knob to the left for clamping the material. Turn the knob to the right for releasing the
material.
Cutting can be started with either left vise or right vise clamping, but for better performance,
use both left and right vises to clamp the material.
6. Left vise clamp/release knob
Turn the knob to the left for clamping the material. Turn the knob to the right for releasing the
material.
Cutting can be started with either left vise or right vise clamping, but for better performance,
use both left and right vises to clamp the material.
7. Guide arm down button
When this button is pressed, guide arm descends until the operater releases the button.
When adjusting guide arm, please avoid hitting the material.
The closer the guide arm approaches the workpiece, the better the stability of cutting.
8. Guide arm up button
When this button is pressed, guide arm rises until the operater releases the button.
9. Blade speed control knob
Blade speed is controlled by the inverter. Turning the knob clockwise increases the blade speed.