Cosen MH-460M, Instruction Manual, Page: 38 / 88

4 ‐ 4
CONTROL PANEL
The control panel is located on the top of the electrical box. The operator must fully understand the
function of each switch and button before operating the machine.
Non ‐ CE Model
CE Model
No. Control Function No. Control Function
1 Power indicator lamp 4 Coolant On/Off switch
2 Blade start button 5 Blade descend speed control knob
3 Emergency stop button 6 Blade stop button
Control Buttons
1. Power indicator lamp
When the lamp is on, it indicates the power to the machine is turned on.
2. Blade start button
Press this button to start the blade motor.
Make sure the material is securely clamped by the vise before cutting.
3. Emergency stop button
2
1 3 4 5
1
2
3
4 5 6