continued on next page
Vehicle Belts
18
17
Lower Anchor
Hooks
Adjuster
Lower Anchor Belt
Storage Attachment
Lower Anchor Belt
Storage Location
Lower Anchor
Belt Parts
To Remove Lower Anchor Belt from Storage
Attachment on Car Seat
Squeeze the spring lever on the hooks and remove the hooks from the
storage attachments.
To Store Lower Anchor Belt
When using the vehicle belts to install
or when the car seat is not installed in
a vehicle,
the lower anchor belt must be
properly stored in its storage location.
Thread the lower anchor belt through the
Forward-Facing Belt Path
then attach
the hooks to the storage attachments as
shown. Gently tighten to remove slack.
Your vehicle’s features may be considerably different
than those pictured here.
If LATCH: lower anchors are not an option, you must use the vehicle
seat belt system to install the car seat.
Not all vehicle belts and seating positions will work with
car seats.
Please go through the following steps to understand how
to lock a car seat in
Rear-Facing Mode
or
Forward-Facing
Mode
with a vehicle belt.
Lap/Shoulder Belts
To Remove Lower Anchor Belt from
Vehicle’s Lower Anchor Bars
Remove the tension from the belt by push-
ing down on the side of the car seat with
the adjuster. Then press the adjuster’s
button to loosen the belt.
Remove the hook from the anchor by squeezing the spring lever on
the hook, pushing the hook back into the seat bight, and rotating the
hook to the side. Then pull the hook out of the vehicle seat bight.
