sewn
end
53
From Back of Car Seat,
Attach 1st Harness Strap
Loops to Splitter Plate As
Shown
The sewn ends of the harness strap
loops
must
face towards you.
Do not
twist the harness strap or the
harness adjustment strap.
Make sure the harness strap loops
are fitted
completely on
both sides
of the splitter plate.
The harness system must be installed correctly. Do not
use a child restraint with damaged harness straps.
8
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see pages 12-15.
To learn how to check harness tightness,
see pages 44-46.
Check the harness straps often for any wear or damage.
Aircraft Information
54
Install the car seat in a window seat to avoid blocking the aisle. If the
aircraft lap belt is too short, ask the flight attendant for a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label stating
that this car seat is certified for aircraft use.
There is an airplane certification label
located on the side of this car seat as
shown.
Store the lower anchor belt and tether strap when
installing with aircraft belts.
Forward-Facing
Aircraft Installation
Follow the steps on pages 35-38, skipping
the tether strap steps.
Rear-Facing
Aircraft Installation
Follow the steps on pages 25-28.
This restraint is certified for aircraft use.
