Cortelco C56 User Manual Download Page 26

Page: 26 / 53

- 26 -

Display Name

Set the display name. This name is shown on Caller ID.

Enable Registration

Check to submit registration information.

Domain Realm

SIP Domain if different than the SIP Registrar Server.

Proxy Server Address

SIP proxy server IP address or URI

（

This is normally the same as

the SIP Registrar Server)

Proxy Server Port

SIP Proxy server port. Normally 5060.

Proxy User

SIP Proxy server account.

Proxy Password

SIP Proxy server password.

Backup Server Address

Backup SIP Server Address or URI (This server will be used if the

primary server is unavailable)

Backup Server Port

Backup SIP Server Port

Server Name

Name of SIP Backup server

Codecs Settings

Click on the desired codec to select it. Then use the Left/Right arrow keys to move to the

Enabled or Disabled List. Use the Up/Down arrow to change the priority of enabled codecs.

Advanced SIP Settings

Forward Type

There are 3 call forwarding modes plus Disabled.

Disabled

：

No call forwarding – Default mode

Busy

：

If the phone is busy, incoming calls will be forwarded.

No answer

：

If there is no answer, incoming calls will be forwarded

after a specified time.

Always

：

All incoming calls will be forwarded.

Forward Number

Number to which calls are to be forwarded.

No Ans. Fwd Wait Time

Used in conjunction with Call Forward No Answer. Wait time in

seconds before call is forwarded.

Transfer Timeout

Time interval between sending “bye” message and hanging up

after the phone transfers a call.

Enable Hotline

Activate Hot Line feature. Automatically call a number by going

off hook.

Hotline Number

Number to be called in Hot Line Mode.

Warm Line Wait Time

Used in Hot Line Mode. Time the phone waits after off hook

before dialing the hot line number.

SIP Encryption

Enable/Disable SIP Encryption.

SIP Encryption Key

SIP Encryption key.

RTP Encryption

Enable/Disable RTP Encryption.

RTP Encryption Key

RTP encryption key

Enable Auto Answer

Activate Auto Answer mode. If activated, phone will

automatically answer an incoming call.

Auto Answer Timeout

Used in conjunction with Auto Answer. The phone will answer

an incoming call after the Auto Answer Timeout

Enable Session Timer

If enabled, this will refresh the SIP session timer per RFC4028.

Session Timeout

Refresh interval if Session Timer is enabled.

Summary of Contents for C56






















































Search results

Summary of Contents for C56

Reviews:

Related manuals for C56

Brands by name

Popular brands

Cortelco C56, User Manual

Search results

Summary of Contents for C56

Reviews:

Related manuals for C56

Brands by name

Popular brands