Cortelco C56 User Manual Download Page 37 | Manualshive

Page: 37 / 53

background image

- 37 -

outside call. If an intercom call is established, a second intercom

call will be rejected.

DND Return Code

Specify SIP Code returned for DND. Default is 480 - Temporarily

Not Available.

Busy Return Code

Specify SIP Code returned for Busy. Default is 486 – Busy Here.

Reject Return Code

Specify SIP Code returned for Rejected call. Default is 603 –

Decline.

Active URI Limit IP

IP address of the server for the Action URL messages described

below.

Push XML Server

IP address for XML server which can send display content to the

phone.

Enable Call Waiting

Tone

Enables audible notification of call waiting.

Action URL Settings

URL for various actions performed by the phone. These actions

are recorded and sent as xml files to the server. Sample format is

http://InternalServer /FileName.xml

Block Out Settings

Add or Delete Blocked numbers – Enter the prefix of numbers

which should not be dialed by the phone. For example, if 001 is

entered, the phone will not dial any numbers beginning with 001.

X and x are wildcards which match single digits. For example, if

4xxx or 4XXX is entered, the phone will not dial any 4 digit

numbers beginning with 4. It will dial numbers beginning with 4

which are longer or shorter than 4 digits.

5.3.4.3

DIAL PLAN

This phone supports 7 dialing modes:

1.

End with “#”– Dial the desired number, and press # to send it to the server.

2.

Fixed Length – The number will be sent to the server after the specified number of digits

are dialed.

3.

Time Out – Number will be sent to the server after the specified time.

4.

User Defined – Customized rules created by the user.

There is a special feature in the dial plan for the case where the user must dial an access code
to get an external line.    A digit followed by a “,” will cause secondary dial tone to be
generated.    For example, assume a rule “9,xxxxxxx” is added.    When the user dials 9, the
phone will generate secondary dial tone.    Then, when 8 digits have been dialed, they will all

be sent to the server.

5.

Press # to Do Blind Transfer - Press # after entering the target number for the transfer.

The phone will transfer the current call to the third party.

6.

Blind Transfer on Onhook - Hang up after entering the target number for the transfer. The

phone will transfer the current call to the third party.

7.

Attended Transfer on Onhook - Hang up after the third party answers. The phone will

transfer the current call to the third party.

«
...
35
36
37
38
39
...
»

Summary of Contents for C56






















































Reviews:

No comments

Related manuals for C56

Brand: Rath Pages: 6

Brand: Rath Pages: 6

Brand: Audiovox Pages: 79

Brand: Fanvil Pages: 16

Brand: Pantech Pages: 47

Brand: RATH MICROTECH Pages: 2

Brand: HTC Pages: 58

Brand: Maxcom Pages: 109

Brand: TECNO MOBILE LIMITED Pages: 6

Brand: NTT docomo Pages: 201

Brand: Maxcom Pages: 46

Brand: Samsung Pages: 22

Brand: Samsung Pages: 71

Brand: Samsung Pages: 25

Brand: Samsung Pages: 26

Brand: Samsung Pages: 192

Brand: Samsung Pages: 36

Brand: Samsung Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands