Cortelco C56 User Manual Download Page 43

Page: 43 / 53

- 43 -

If this is blank the phone will use anonymous.

Password

Password for configuration server. Used for FTP/HTTP/HTTPS.

Config Encryption Key

Encryption key for the configuration file

Common Config

Encryption Key

Encryption key for common configuration file

DHCP Option Settings

Field Name

Explanation

DHCP Option Setting

The phone supports configuration from Option 43, Option 66, or a

Custom DHCP option. It may also be disabled.

Custom DHCP Option

Custom option number. Must be from 128 to 254.

Plug and Play Settings

Enable PnP

If this is enabled, the phone will send SIP SUBSCRIBE messages to

a multicast address when it boots up. Any SIP server understanding

that message will reply with a SIP NOTIFY message containing the

Auto Provisioning Server URL where the phones can request their

configuration.

PnP Server

PnP Server Address

PnP Port

PnP Server Port

PnP Transport

PnP Transfer protocol – UDP or TCP

PnP Interval

Interval time for querying PnP server. Default is 1 hour.

Phone Flash Settings

Server Address

Set FTP/TFTP/HTTP server IP address for auto update. The address

can be an IP address or Domain name with subdirectory.

Protocol Type

Specify the Protocol type FTP, TFTP or HTTP.

Config File Name

Specify configuration file name. The phone will use its MAC ID

as the config file name if this is blank.

Update Interval

Specify the update interval time. Default is 1 hour.

Update Mode

1. Disable – no update

2. Update after reboot – update only after reboot.

3. Update at time interval – update at periodic update interval

5.3.6.2

Syslog

Syslog is a protocol used to record log messages using a client/server mechanism. The

Syslog server receives the messages from clients, and classifies them based on priority and

type. Then these messages will be written into a log by rules which the administrator has

configured. There are 8 levels of debug information.

Summary of Contents for C56






















































Search results

Summary of Contents for C56

Reviews:

Related manuals for C56

Brands by name

Popular brands

Cortelco C56, User Manual

Search results

Summary of Contents for C56

Reviews:

Related manuals for C56

Brands by name

Popular brands