Cortelco 8015 Owner'S Instruction Manual Download Page 49

Page: 49 / 55

Frequency Range

1.92~1.93GHz

Channels

60 Duplex channels

Frequency Stability

Carrier Power

Modulation

<100mW

GFSK

50 KHz

Charging time

15 hours

Ambient temperature

Normal:

~ 35

, Extreme: 0

~ 40

Humidity

0%~90%

Weight (grams)

Base: 131.4; Handset: 82.8

Dimensions (mm)

Base:

Handset:

141 x 95 x 70;

125 x 46 x 24

Power Supply

Base input: 9V, 300mA; Handset input: Ni-MH: 1.2V 3, 600mAh

Technical Specifications

Design and specifications are subject to change without notice.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause

damage to the eyes or skin. It may be toxic if swallowed.

Exercise care in handling batteries in order not to short the battery with conducting

materials such as rings, bracelets and keys. The battery or conductor may overheat and
cause burns.

Charge the batteries only in accordance with the instructions and limitations specified in
this manual.

Observe proper polarity orientation for the batteries as marked in the telephone.

Do not mix old and new batteries.

Do not mix batteries of different sizes or from different manufacturers.

Use only the power supply which came with the phone.

Summary of Contents for 8015
























































Search results

Summary of Contents for 8015

Reviews:

Related manuals for 8015

Brands by name

Popular brands

Cortelco 8015, Owner'S Instruction Manual

Search results

Summary of Contents for 8015

Reviews:

Related manuals for 8015

Brands by name

Popular brands