Description:
Manual L4 ES HP; L4 ES HP W
Document Number:
1004289
Created By:
MSHN
Revision Approval Date:
2019-06-28
Revision:
A
© Corroventa Avfuktning AB
25 (42)
Activate the timer by pressing the right-hand arrow
button four times to open the timer menu.
Press Activate.
When the timer has been activated, the machine begins
by prompting the user to check that the time and date
have been set correctly. If they have been, press OK. If the
time or date need changing, press Edit and adjust the
values before continuing.
In the next step the user can set the time interval that the
machine is to work within. The machine remembers the
timer settings from the previous time it was used and
shows its settings as the start values.
The Other time setting determines whether the machine,
during the day's remaining hours, must be in standby
mode or run at lower fan speed for minimal noise.
Network
Note! Install all system cables before the machines are
started.
L4 ES has network functions that enable local interaction
between machines, for example pressure drying and use
of external sensors for relative humidity and temperature
control of the machine. The network functions also
prepare the machine for a future SuperVision system that
will allow remote monitoring and remote control of the
machines via Internet.
A network is established by installing the machines in the
intended way and connecting them to each other using
system cables before they are started.
Open the network menu on the machine which is to be
master, i.e. control the others.
