Description:
Manual L4 ES HP; L4 ES HP W
Document Number:
1004289
Created By:
MSHN
Revision Approval Date:
2019-06-28
Revision:
A
© Corroventa Avfuktning AB
24 (42)
Capacitymode
The drying capacity of L4 ES can be optimised for a given
work task and situation with three different operating
modes.
When setting MAX (maximum) the machine works to
remove as much water as possible. If the machine's total
power is not required, it can instead be set to ECO (eco-
mode) where the energy consumption per litre of
removed water is minimised.
For localised water damage where the dry air volume is
not required, the machine can be set to one of its ΔX
modes. In this mode, the machine produces a smaller
amount of even drier air that further accelerates the
drying process. The difference between ΔX1 and ΔX2 etc.
is the dry air volume. ΔX1 has the smallest volume.
For use during pressure drying when the machine is
connected as slave to a turbine in a local network, L4 ES
also has a pressure drying mode (TRT) where it
automatically adjusts the wet air flow so that the
produced air is as dry as possible.
MAX
For maximum removal of water.
ECO
For minimal energy consumption per
litre of removed water.
ΔX1, ΔX2...
For maximum ΔX, as dry air as
possible. Reduced air amounts suitable
for e.g. local, isolated water damage.
TRT
Pressure drying mode that can be used
when the machine is connected to a
network and connected as slave to a
turbine.
Timer
L4 ES has an integrated timer function that allows the
user to determine when the machine is to run. When the
timer function is used, the word Timer appears in the
standard view's upper, right-hand corner according to the
graphic to the right.