© Corroventa Ltd.
2017.07
11 (27)
Control mode
In control mode, it is determined whether drying
should occur continuously (MAN - manual mode)
or is only to be activated when necessary, on the
basis of the ambient climate.
The selected control mode is displayed in the
lower, left-hand corner in standard view.
Open the screen for selecting control mode by
pressing the upper, right-hand button.
The following basic control modes are available:
MAN
Manual, continuous drying.
RH
Dehumidification for selectable
relative humidity (%).
X
Dehumidification for selectable
mixing ratio (g/kg).
DP
Dehumidification for selectable dew
point (°C).
HYG
Dehumidification is controlled by an
external hygrostat that is connected
to the machine.
Thanks to its network functions, you can also
connect the machine to external temp. and RH
sensors, and use their values to control
operation, instead of the built-in sensor for
relative humidity and temperature. The
following modes for external sensors exist for
this purpose:
E.RH
Dehumidification for selectable
relative humidity (%) according to
the input values from the external
temp and RF sensor(s) that are
connected to the machine.
E.X
Dehumidification for selectable
mixing ratio (g/kg), according to the
input values from the external
sensor(s) that are connected to the
machine.
E.DP
Dehumidification for selectable dew
point (°C), according to the input
values from the external sensor(s)
that are connected to the machine.
The external control mode requires that the
machine is network connected and connected to
