CORRECT CRAFT Boat User Manual Download

Page: 97 / 192

4-27

Controls and Indicators

Keel Offset

Adjust depth sounder to measure depth below keel or drive instead
of sensor.

The display will show “K X.X” which is the current setting for the
keel offset. Pressing

and

will change the keel-offset setting.

Holding M in for two seconds will save the new keel offset setting
and change the display back to the normal depth mode. The keel
offset is normally a negative number.

Units

Change the unit of measure.

This display will show “UNIT FT” for feet (default), “UNIT FA” for
fathoms, or “UNIT M” for meters. Pressing

and

will cycle

through the choices. Pressing and holding the M will save the units
shown in the display and change the display back to the normal
depth mode.

Keel Display

CORC124

Nautique Ski Sec 4.qxd:Nautique Ski Sec 4.qxd 6/25/08 3:11 PM Page 27

Summary of Contents for Boat

































































































































































































Search results

Summary of Contents for Boat

Reviews:

Related manuals for Boat

Brands by name

Popular brands

CORRECT CRAFT Boat, User Manual

Search results

Summary of Contents for Boat

Reviews:

Related manuals for Boat

Brands by name

Popular brands