CORRECT CRAFT Boat Page 188 User Manual Download | Manualshive

Page: 188 / 192

background image

W-4

Some states do not allow limitations on how long an implied
warranty lasts. Some states do not allow the exclusion or
limitation of incidental or consequential damages. This warranty
gives you specific legal rights, and you also have other rights which
may vary from state to state. To the extent that your state does
not allow any exclusion or limitation expressed herein, such
exclusion or limitation will not apply to you. All other allowable
limitations or exclusions shall apply to you.

Note:

This warranty is expressly conditioned upon the

completion and return of the warranty registration card to
Correct Craft, Inc. Although not obligated to and without creating
such an obligation, this will enable us to notify you of any
necessary performance or safety modifications to your boat and to
verify ownership in case a warranty claim is filed on your boat.

Procedure:

In the event your Nautique boat has a claim covered by this
warranty, the following procedure shall be allowed to secure
performance of warranty obligations:

1. Notify the selling dealer in writing within thirty (30) days after

the discovery of any claimed defect.

2. You may be required to transport the boat, at your expense, to

an authorized dealership or service facility for their inspection
and/or repair.

3. Correct Craft, Inc. reserves the right to require further

evaluation and/or information regarding a warranty claim
against a boat prior to its repair as well as designate the place
of repair.

Correct Craft, Inc. reserves the right to make changes in prices,
color, specifications, equipment, options, materials, hull, decks,
and/or discontinue models at any time (without notice), and shall
be under no obligation to equip or modify boats built prior to
such changes.

Correct Craft, Inc., 14700 Aerospace Pkwy, Orlando, Florida
32832. 407/855-4141, FAX 407/851-7844, E-mail address:
[email protected]. Effective 2006-2009 Model boats.

Nautique Ski Warranty.qxd:Nautique Ski Warranty.qxd 6/24/08 12:14 PM Page W-4

«
...
186
187
188
189
190
...
»

Summary of Contents for Boat

































































































































































































Reviews:

No comments

Related manuals for Boat

Brand: Elie Pages: 3

Brand: Ockelbo Pages: 64

Brand: Hallberg-Rassy Pages: 27

Brand: Sea-doo Pages: 100

Brand: Sea-doo Pages: 109

Brand: Bavaria Pages: 77

Brand: LaserPerformance Pages: 22

Brand: Hunter Pages: 157

Brand: J/Boats Pages: 51

Brand: J/Boats Pages: 36

Brand: Sailfish Pages: 52

Brand: Quicksilver Pages: 71

Brand: Ranger Tugs Pages: 40

Brand: WARRIOR BOATS Pages: 80

Brand: LaserPerformance Pages: 9

Brand: Duffy Pages: 16

Brand: Bestway Pages: 4

Brand: Wehncke Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands