USING THE DISPENSER - 29
COROB™ FLEX 900
6.5 Refilling the canisters
2
3
4
6 cm
2”
Figure 15
1. Push the off-line button for an instant (chapter 5.6).
2. Open the upper covers.
3.
Remove the lid of the canister to be filled.
Shake the container of colorant to be poured into the canister manually. Do not use automatic shakers.
4. Make sure that the bottle draining system is correctly positioned, then add the desired colorant to the
canister, by pouring it directly on the bottle drainer, so as to avoid spattering or creating air emulsions in
the colorant.
WARNING
To avoid colorant spills from the shaft of the stirring system, it is essential that you DO NOT REMOVE the
bottle drainer while topping up. The colorant level MUST NOT exceed the maximum level, placed at 6 cm from
the upper edge of the canister. Colorant spills cause the circuit pumping unit to be blocked.
5. Close the canister with its corresponding lid.
6.
Repeat the above steps to fill other canisters.
7. Close the upper covers and restore the machine by pressing for an instant the off-line button (chapter 5.6).
Summary of Contents for Flex 900
