SAFETY - 5
COROB™ FLEX 900
2
SAFETY
2.1
General warnings
COMPULSORY
•
Read the user’s manual carefully before carrying out any operation on the machine.
•
The machine must be used only for its intended purpose.
•
Pay close attention to the signs on the machine.
•
The substances that may be used on the machine -- such as colorants, paints, solvents, lubricants and
cleansers -- may be hazardous to your health; handle, store and dispose of these substances in keeping
with current regulations and the instructions provided with the product.
• Only qualified and appropriately trained personnel (MAINTENANCE TECHNICIANS) are authorized to access
the machine parts protected by panels for maintenance and repair interventions.
•
During routine maintenance operations, scrupulously follow the safety instructions given in the corresponding
chapters before accessing the dangerous area.
PROHIBITED
•
The OPERATOR must not carry out operations reserved to the MAINTENANCE TECHNICIAN. The manufacturer
CANNOT BE HELD RESPONSIBLE for damages deriving from the non-observance of this prohibition.
•
It is strictly forbidden to bypass or disable the protections and any safety devices present on the machine.
•
The panels must be kept closed at all times.
•
THE MACHINE IS NOT EXPLOSION-PROOF AND MUST NOT BE USED IN AREAS AT RISK FOR
EXPLOSION.
•
Do not stare the light source of the Laser Bung Hole Locator (Class II laser product).
• If the machine catches fire,
never use water
. Use only dry powder or carbon dioxide fire extinguishers, and
strictly follow the instructions and warnings indicated by the manufacturer and listed on the extinguisher.
ELECTRICAL DANGER
•
In the event of a sudden power outage, when power returns the machine will automatically be switched on
to allow the automatic processes to prevent products from drying out.
• The machine must not be powered by a power source having specifications other than those listed on the
identification plate.
•
Incorrect grounding may lead to the risk of electrical shock; always plug the machine into a socket that
ensures proper grounding. The line must be protected from overloads, short-circuits and direct contacts
according to current accident prevention regulations.
•
To prevent any risk of electric shock or injuries, the machine must be used indoors only.
•
Always unplug the power supply cable from the socket outlet before carrying out any maintenance operations.
•
The machine is isolated from the power supply line when the power cable is disconnected; it must therefore
be installed near an easily accessible mains socket outlet.
•
Do not use extension cords to power the machine.
•
Do not use multisockets to connect other equipment to the same socket that powers the machine.
•
Periodically check the condition of the power supply cable; if it is damaged, replace it with a new cable
supplied by the manufacturer.
Summary of Contents for Flex 900
