14 - SHIPPING, HANDLING AND UNPACKING
COROB™ FLEX 900
4.3
Unpacking and placement
1 x 10 mm
2 x 13 mm
To remove the fixing brackets
PH2
To fix the packing cover
DANGER
The following procedure must be carried out by at least 2 people.
Store the packing material for future use, or dispose of it according to current regulations. In any case, we
recommend that you keep it for the entire duration of the machine warranty.
Make sure the packing has not suffered any damage or tampering during shipping; if so, contact the
authorized technical service or your dealer.
1. Remove cover
A
.
2. Remove cardboard box.
3. Remove machine wrapping.
1
3
2
B
A
Figure 3
DANGER
Should the machine appear damaged during shipping, do not attempt to start it and contact the authorized
technical service or dealer.
4.
Slightly loosen the two screws that fix the front bracket to the base of the pallet.
5. Lower the feet (chapter 4.3.1) until the wheels are no longer resting on the pallet surface.
6.
Remove all screws and nuts that fix the rear bracket to the machine and to the pallet.
7. Operating from the front side, with one person at each corner, tilt the machine frontally until the rear
bracket is free and can be removed by a third person.
8. Now remove the front bracket.
Summary of Contents for Flex 900
