CORNING Everon 6000 User Manual Download

Page: 50 / 75

User Manual v1.0

Corning Restricted and Confidential Proprietary - Controlled content

UM - Everon 6000 DAS - 19-DEC-2020.docx| December 2020

|Page 50 of 170

2.3.2

MRU Interfaces

Warning!

In the event that a PAM or the OPTM needs to be removed from the chassis, make

sure to first press the release button on the module and then pull out using the handle (see

Error!

Reference source not found.

). Any attempt to pull out the module without first releasing may

cause damage.

Corning will not be liable for damage of products resulting from improper handling during
installation or repair.

PAMs are entered to their relevant slots by matching the color of the PAM and the color on top
of the slot.

Notes:

External
Alarms

3.5 GHz

Management
port

SFPs

AC/DC
Connector

Antenna

Test

Units’ Release

button and

handle

DPAM Modules

FANs

Handle

Release
button

Summary of Contents for Everon 6000












































































Search results

Summary of Contents for Everon 6000

Reviews:

Related manuals for Everon 6000

Brands by name

Popular brands

CORNING Everon 6000, User Manual

Search results

Summary of Contents for Everon 6000

Reviews:

Related manuals for Everon 6000

Brands by name

Popular brands