5
Instruction Manual
4.1 Display
Set
Displays the setting experiment parameters.
Actual
Displays the actual parameters (ramp up/cool down).
Prog
Program button, used for programming.
Temp
Temperature will flash when selected.
Time
Time will flash when selected. During Timed mode, the time will
countdown. In continuous operation mode, time will run for the
duration of operation (Figure 5).
Speed
Speed of the setting area correlate to the 3 mm orbit agitation
motion in rpm and will flash when selected.
Adjustable knob
At parameter setting state, rotate to alter function values. Press
to confirm setting. During operations press to pause/resume,
press and hold to stop/end.
5.0 Instrument Operation
5.1 Parameter Setting
Press the function button. The corresponding characters of the setting area will flash.
Rotate the parameter knob. Input the target parameters for the experiment.
Wait 3 seconds, the corresponding character will stop blinking. Complete parameter setting.
NOTE:
When powered On, the Settings screen will display parameters of the last run. When
the Time is adjusted to 00:00, the device will run in continuous mode.
