CHD22/CHD30
Specification & Limitations
Page
5
This dispenser is designed to be installed and operated
indoors, in a controlled
environment.
It’s minimum and maximum operating temperature limits are the same as
those for the ice machine.
Minimum
Maximum
Air Temp
50
o
F
100
o
F
Check the dispenser nameplate, located on the back of the cabinet for specific information.
Cornelius reserves the right to make design changes and/or improvements at any time.
Specifications and designs are subject to change without notice.
Cornelius assumes no liability or responsibility of any kind for products manufactured by
Cornelius that have been altered in any way, including the use of any parts and/or other
components not specifically approved by Cornelius.
Models:
CHD22
The Basic version is constructed to deliver ice when the ice chute is pushed in, and it
continues to vend ice as long as the ice chute is held in or until the bin is empty.
CHD30
There are two versions of the CHD30 dispensers: Basic and Coin/token. The Basic version
is constructed to deliver ice when the ice chute is pushed in, and it continues to vend ice as
long as the ice chute is held in or until the bin is empty.
The Coin/token version is designed to deliver ice after a coin or token is inserted into the coin
slot AND then the ice chute is pushed in. Ice vending is limited to a preset time per coin or
token use. Coins or tokens are collected in a coin box at the bottom of the dispenser. A keyed
door allows access to the coin box without removing the front panel.
The Basic models of the CHD22 and CHD30 are available in 230 volt 50 Hz electrical for
those countries with that type of electrical service.
Kits: Bin tops and bin thermostats are not required. No other kits are available.
Distributed By:
Commercial Refrigeration Service, Inc.
WWW.866IceMakers.COM
866-IceMakers
623-869-8881
Summary of Contents for CHD22
Page 2: ......