300099001
4
Two and Four-Flavor Kits. (see Figure 2 or 3)
E.
Connect GAS LINES ASSEMBLIES (item 4) to check valves on manifold assembly installed in nitro-
gen gas regulator assembly outlet. Seal connections with TAPERED GASKETS, WHITE (item 3).
F.
Route, but do not connect, other ends of gas lines with quick disconnects on their ends to concentrate
tanks location.
G.
Connect PRODUCT LINES ASSEMBLIES (item 5) to 1/4-inch flare (7/16-20) concentrate inlet fittings
on back of the Dispenser. Seal connections with TAPERED GASKETS, WHITE (item 3).
H.
Route other ends of product lines, with quick disconnects on their ends, to concentrate tanks location.
4. Connect nitrogen gas pressure regulator and lines assembly to nitrogen gas cylinder as instructed in Ser-
vice Manual provided with the Dispenser.
5. Complete Dispenser installation as instructed in Service Manual provided with the Dispenser.
IMPORTANT: Nitrogen gas check valves (see applicable Figure 1, 2, or 3) must be inspected and
serviced at least once a year as instructed in Service Manual provided with the Dispenser.