3
300099001
Kits Part Numbers and Their Part Quantities
Item-
No.
Part
No.
Name
300025000
300025200
300026000
300026200
300388000
300388200
1
183405000
Nitrogen Gas Regulator
Ass’y
1
1
1
1
1
1
2
183301100
Check Valve
1
1
–
–
–
–
3
178025100
Tapered Gasket, White
3
3
5
5
9
9
4
176090136
Gas Line Ass’y (with ball-
lock quick disconnect)
1
–
2
–
4
–
178151136
Gas Line Ass’y (with pin-
lock quick disconnect)
–
1
–
2
–
4
5
176103148
Product Line Ass’y (with
ball-lock quick discon-
nect)
1
–
2
–
4
–
178150148
Product Line Ass’y (with
ball-lock quick discon-
nect)
–
1
–
2
–
4
6
183302100
Manifold Ass’y
–
–
1
1
–
–
183304100
Manifold Ass’y
–
–
–
–
–
1
IMPORTANT: Only qualified personnel should install this kit.
1. Unpack and inspect kit. Make sure all items are present and in good condition.
2. One Flavor Kit. (see Figure 1)
Install CHECK VALVE (item 2) in NITROGEN GAS REGULATOR ASS’Y (item 1) outlet. Use pipe thread
sealing compound to seal connection.
Two and Four–Flavor Kits. (see Figure 2 or 3)
Install MANIFOLD ASS’Y (item 6) in NITROGEN GAS REGULATOR (item 1) outlet. Use pipe thread seal-
ing compound to seal connection.
3. One-Flavor Kit. (see Figure 1)
A.
Connect GAS LINE ASS’Y (item 4) to check valve installed in nitrogen gas regulator assembly. Seal
connection with TAPERED GASKET, WHITE (item 3).
B.
Route, but do not connect, other end of gas line with quick disconnect on its end to concentrate tank
location.
C.
Connect PRODUCT LINE ASS’Y (item 5) to 1/4-inch flare (7/16-20) concentrate inlet fitting on back of
dispenser. Seal connection with TAPERED GASKET, WHITE (item 3).
D.
Route other end of product line, with quick disconnect on its end, to concentrate tank location.
