Cormach MOTO MEC, Use And Maintenance Manual

Page: 7 / 36

Use and maintenance manual – 10/2016 Rev. 3 Page 1
CONTENTS
1. Introduction Pag. 2
2. Intended use Pag. 2
3. General safety rules Pag. 3
3.1 Safety devices Pag. 3
4. Transport and handling Pag. 3
5. Unpacking Pag. 4
6. Installation and commissioning Pag. 4
6.1 Installing the display head Pag. 4
6.2 Flange for motorcycle wheel Pag. 5
6.3 Electrical connection Pag. 7
7. Installation Pag. 8
7.1 Installation area Pag. 8
7.2 Fixing plugs Pag. 8
8. Suspension of the use Pag. 9
9. Environmental information Pag. 9
10. Technical data Pag. 9
10.1 Machine dimensions Pag. 10
10.2 Working range Pag. 10
10.3 Presentation of the machine Pag. 11
11. Serial number plate information Pag. 11
12. Ordinary maintenance Pag. 11
13. Control panel Pag. 12
13.1 Keyboard Pag. 13
13.2 NORMAL, SERVICE, STAND BY operating modes Pag. 14
14. Machine calibration Pag. 14
14.1 When to carry out machine calibration Pag. 14
14.2 Machine calibration for the MOTO/QUAD Wheel Type Pag. 15
15. Use of the machine in normal mode Pag. 17
15.1 Program Type Pag. 18
15.2 Wheel type Pag. 19
15.2.1 MOTO wheel type Pag. 19
15.2.2 QUAD wheel type Pag. 19
15.3 Entering wheel dimensions Pag. 20
16. Hidden weights program Pag. 21
17. Utility programs Pag. 22
17.1 Selecting the imbalance display resolution Pag. 22
17.2 Selection of the static imbalance display Pag. 23
18. Service mode Pag. 23
19. Signals Pag. 27
19.1 Error codes Pag. 27
19.2 Warning codes Pag. 28
19.3 Special visual signals Pag. 28
20. Fire prevention means to use Pag. 28