Cormach MOTO MEC, Use And Maintenance Manual

Page: 11 / 36

Use and maintenance manual – 10/2016 Rev. 3 Page 5
050 Secure the head to the support with the M6
screws.
Figure F6.7 Figure F6.8
060 Attach the head with its CPU board to the sheet
metal front support (Figure F6.9).
Figure F6.9
070 Secure the head with no. 4 M6 screws.
Figure F6.10
6.2 Flange for motorcycle wheel
The motorcycle flange kit is provided completed as showed in
figure F6.11. Set of:
• Nr. 1 shaft Ø 14 mm
•
Nr. 2 cones Ø 14.5 ÷ Ø 25.5
• Nr. 2 cones Ø 20.5 ÷ Ø 35
•
Nr. 2 bushes Ø 17 + spacers
• Nr. 1 measuring adapter
•
Nr. 1 calibration weight
Figure F6.11
Assembly instructions
010 Insert the pin Ø 14 mm inside the flange (Fig.
F6.12)
Figure F6.12
020 Insert the suitable screws to lock the pin (Fig.
F6.13).
Figure F6.13