Cormach MEC 1, Technical Support Manual

Page: 9 / 19

Technical Support Manual – 05/2015 Rel. 0 Page 7
RET

Return
This option allows you to return to the SERVICE mode, as shown in figures F2.14 and F2.15.
Figure F2.14: Return message Figure F2.15: SERVICE mode message
3. MENU PARAMETERS ACCESS (with password)
The Parameters MENU allows you to run various operations reserved to technical personnel, such as re-setting the revolution counter
- SPIN. To access the Parameters MENU, proceed as follows:
1. Enter the SERVICE mode by pressing [F+P3] ;
2. Press [F+P5] to access the Parameters MENU;
3. A password is required to enter this menu. Enter the password by pressing the keys in the sequence indicated within 5
seconds, or the machine will return to SERVICE mode:
a) [P2]
b) [P4]
c) [P5]
d) [P9]
The password must not be disclosed to the end user, as he/she may accidentally modify the machine configuration;
4. Browse the list of the menus with keys [P4] or [P5] until the option required is displayed. The menu options
available are listed in table T3.1;
Table T3.1: Parameters Menu Option
Options Description Notes
SPn
Reset the revolution counter
Ret
Return to SERVICE mode
5. Press keys [F+P5] to confirm the option;
6. Some programs require additional confirmation to continue (the flashing message
yEs
is displayed). Press [F+P5]
to confirm or any other key to cancel;
7. To exit the Parameters Menu, select option
Ret
and press keys [F+P5] .