Cormach CM 1200 BB, Use And Maintenance Manual

Page: 6 / 49

4
User manual CM 1200 BB
INTRODUCTION
The purpose of this manual is to furnish the
owner and operator with a set of practical, safe
instructions on the use and maintenance of the
CM 1200 BB tyre changer.
Follow all the instructions carefully and the ma-
chine will give you the efficient and long-lasting
service that has always characterised CORMACH
products, making your work considerably easier.
The following points define the levels of danger
regarding the machine, associated with the war-
ning captions found in this manual:
DANGER
Refers to immediate danger with the risk of
serious injury or even death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or even death.
CAUTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before powe-
ring up the machine. Keep this manual and all
illustrative material supplied with the machine
in a folder near the tyre changer, where it is rea-
dily accessible for consultation by the machine
operators.
The technical documentation supplied is consi-
dered an integral part of the machine and must
always accompany the equipment if it is sold or
transferred to a new owner.
The manual is only to be considered valid for the
machine model and serial number indicated on
the nameplate applied to it.
WARNING
Observe the contents of this manual: the ma-
nufacturer declines all liability in the case of
uses of the machine not specifically described
and authorised in this manual.
WARNING
This machine must be used only by qualified
and authorised personnel able to understand
the written instructions provided by the manu-
facturer of the machine, the tyres and the rims.
He must be suitably trained and conversant with
the safety procedures. Use of the machine by
unskilled staff may con
stitute a serious risk for the operator and for
the final user of the product processed (the
wheel rim and tyre mounting).
NB:
Some of the illustrations in this manual have been
taken from photographs of prototypes: standard
production machines may vary in some respects.
These instructions are intended for people with
basic mechanical skills. We have therefore omit-
ted detailed descriptions of procedures such as
how to loosen or tighten the fixing devices on the
machine. Do not attempt to perform operations
unless properly qualified and with suitable ex-
perience. In case of need, contact an authorised
Service Centre for assistance.
TRANSPORT, STORAGE AND
HANDLING
Conditions for transporting the
machine
The tyre changer must be transported in its
original packaging and stowed in the position
shown on the packaging itself.
- Packaging dimensions:
• width ...................................................1543mm
• depth ..................................................1140mm
• height ..................................................1900mm
- Weight of wooden packaging:
• .................................................................. 380kg
Ambient conditions for machine
transport and storage
Temperature: -25° - +55°C.
WARNING
Do not stack other goods on top of the packa-
ging, to avoid damaging it.
Handling
To move the packaging, insert the tines of a