EM 9250
Operator’s manual
111
UK
Press the
key to exit or the
key to stay in the programme.
- The following message could be displayed at the end of the first spin:
Out
2
In this case it is advisable to exit the programme by pressing the key:
the values
of the weights necessary for balancing the wheel are displayed. The programme execu-
tion is interrupted, thus not achieving the moderate improvement of the end results. By
pressing the
key the optimisation procedure can be continued.
- At the end of the first spin the instruction that the tyre is to be mounted on the rim in
the reverse direction may appear. If you do not intend to reverse the tyre or if doing so
is impossible, press the
key and the machine will provide the instructions for
completing the programme without reversing the tyre.
13. ENABLING THE OTHER OPERATOR
This programme makes it possible for two different operators to use the machine at the
same time due to the presence of two different working environments.
The parameters which remain saved for every working environment are:
- balancing mode (Dynamic, Alu x, Motorcycle etc.);
- wheel dimensions (distance, diameter and width of those relating to the active ALU
programme).
The machine's general settings remain the same for all working environments:
- grams/ounces, sensitivity x1/x5, threshold, etc....
Proceed as follows to recall this programme:
• press the
key
- use the
keys to search for OPE 1 (or OPE 2 if previously set)
• press the
key to change the setting:
1
first operator
or
2
second operator
