Corghi 4-109039, Operator'S Manual

Page: 17 / 48

User's manual BR2-C1E 17
UK
maChINE DESCRIPTIoN
The BR is a grooved drum type winder with
manually loaded driven cone and with the fea-
tures, dimensions and weights indicated in the
paragraph
Technical Specifications
.
The machine uses tailstocks to hold tubes with
a traverse of 6” and a conicity of 0° (parallel)
to 5°57’.
The machine is ideal for winding all types of yarns,
from short staple yarns to continuous filament
yarns (cotton, acrylic, wood and synthetics).
The BR2 is supplied in 6” configuration only.
TEChNICaL
SPECIFICaTIoNS
- Drive: 1 coaxial motor per head
- Power supply voltage: 50/60Hz V AC
• 220-230 three-phase
- Power absorption: 0.09 Kw per 6” motor
- Speed: 300 to 1000 m/min
- Speed adjustment: electronic adjustment with
pushbutton control and digital display
- Crossover angle: standard 14° (other angles
available on request)
- Traverse: 6” (152 mm)
- Cone size: max. 290 mm (11.4”)
head arrest at desired cone diameter
- Winding:
• Cylindrical 0°
• Truncated conical 3°30’, 4°20’, 5°57’
- Slub catcher: 1 per head, mechanical with mi-
crometric adjustment
- Square hole waxer: 1 per rotating head and
driven counter-rotating head
- Self cleaning yarn brake
- Dimensions (fig.4):
Length 700 mm
Depth 570 mm
Height 1285 mm
- Net weight
• BR2: 55 kg
- Noise levels in operating conditions
≤ 60
d
B (A)
STaNDaRD EQUIPmENT
950315051 Yarn tensioner washer (1 per
head)
950420839 Spring 17x32x0.8 (1 per head)
oPTIoNaL aCCESSoRIES
807247886 ST offset arm kit (not with 10”
version)
807250378 6" SS offset arm kit (not with 10”
version)
NoRmaL oPERaTING
CoNDITIoNS
The equipment is intended for professional
use only.
CAUTION
Get to know your machine: your familiarity
with its exact operation is the best guarantee
of safety and performance.
Learn the set up of all controls and their func-
tions.
Accurately check for correct functioning of every
machine control device.
To prevent accidents and personal injury, all the
equipment must be correctly installed, correctly
operated and correctly serviced.
The BR winder is designed exclusively for the
production of cones, using the accessories sup-
plied and as described in this manual.
CAUTION
Any use of the machine other than the de-
scribed use is to be considered as improper
and unreasonable.
WARNING
It is advisable to use only CORGHI original
tools for working.
Fig. 5 shows correct operator position during
loading and unloading of the cones.
CAUTION
To stop the machine under emergency condi-
tions:
- Disconnect the emergency switch.
- Remove the plug from the power socket.
- Cut off the pneumatic air supply system by
disconnecting the shut-off valve (quick cou-
pling).