Corghi 4-109039, Operator'S Manual

Page: 16 / 48

16 User's manual BR2-C1E
- If the machine is connected directly to the
power supply by means of the main electrical
panel and without the use of a plug, install a
key-operated switch or suitable lock-out device
to restrict machine use exclusively to qualified
personnel.
The machine operates with three-phase 50/60Hz
230V power. The electrical hook-up must be
sized in relation to the power specified on the
corresponding machine data plate.
NOTE
The machine version equipped with the splicer
accessory includes a pressure regulator set to
6 bar (for standard machine use).
WARNING
An efficient earthing circuit is essential for safe
and correct machine operation.
NEVER connect the earth line to gas or water
lines, to telephone wires, or to other unsuit-
able objects.
SaFETY REGULaTIoNS
CAUTION
Failure to observe these instructions and the
relative danger warnings can cause serious
injury to the operator and others. Do not power
up the machine before you have read and
understood all the danger/warning/attention
notices in this manual.
This machine must be used only by qualified and
authorised personnel. A qualified operator has
read and understood the manufacturer’s instruc-
tions, is suitably trained, and is conversant with
safety and adjustment procedures to be adhered
to during operations. Operators are expressly
forbidden from using the machine under the
influence of alcohol or drugs capable of affecting
physical and mental capacity.
The following conditions are essential:
- The operator must be able to read and under-
stand the contents of this manual.
- The operator must have a thorough knowl-
edge of the capabilities and features of this
machine.
- Keep unauthorised persons well clear of the
area of operations.
- Check that machine installation complies with
all currently effective regulations and stand-
ards.
- Make sure that all machine operators are suit-
able trained, that they are capable of using the
machine correctly and that they are adequately
supervised during their work.
- Never leave nuts, bolts, tools or anything else
on the machine which could get caught up in
moving parts while the machine is in opera-
tion.
- Never touch electrical devices, lines or mo-
tors without checking that the plug has been
removed from the power socket.
- Read this manual carefully and learn how to
use the machine correctly and safely.
- Always keep this user manual in a place where
it can be readily consulted when working with
the machine and consult it whenever you are
in need of confirmation or explanations.
CAUTION
Do not remove or deface any of the WARNING,
CAUTION or INSTRUCTION decals. Replace any
missing or illegible decals. If one or more of
these decals has been detached or damaged,
request them from your nearest dealer.
- When operating or servicing the machine, ob-
serve unified industrial accident prevention
regulations for high voltage equipment.
- Any unauthorised modification to the machine
releases the manufacturer of all liability in the
event of damage or personal injury resulting
from said modification. Specifically, tampering
with or removing the machine’s safety devices
is a breach of the regulations for industrial ac-
cident prevention.
WARNING
During all operating and servicing procedures,
long hair should be restrained. Do not wear
large or flapping clothes, ties, necklaces, rings
or wristwatches which could get caught in the
machine’s moving parts.