XD601-D2 Piezo Nanopositioning Stage User Manual
10
Please do not connect in this way as shown below:
FIG. 8 Inappropriate bolt selection
Notice:
When mounting the load, tighten the load slowly. The torque should not be too large
to prevent damage to the mechanism.
Avoid stretching and bending cables.
Use the dedicated cable provided by CoreMorrow to connect XD601-D2 and the
controller.
Do not connect via an extension cable casually, if you need a longer cable, please
contact CoreMorrow.
5.3 Operating
Please reconfirm the following information before turning on the power:
The operating environment meets the operating environment requirements of
XD601-D2.
Fixed screws must be tightened.
