background image

13 

 

 

 
 
 
 
Use the charger only in a standard  
120 V AC, 60 Hz electrical outlet. 
 

       WARNING: 

Do not 

use the charger in wet or 
damp conditions. The 

charger is intended for indoor use only. 
Do not use outdoors. Do not expose to 
dew, rain or garden sprinklers, frost, or 
snow. Do not use the charger near 
sinks or tubs. Do not immerse the 
charger in water. 

Water entering the 

chargers or Power Cells will increase 
the risk of electric shock.

 

 

Do not operate power chargers in 
explosive atmospheres, such as in 
the presence of flammable liquids, 
gases or dust.

 

Power chargers can 

create sparks which may ignite the 
liquids, fumes or dust. 

 

Do not use the CORE

TM

 Outdoor Power 

CSC 6500-S standard charger or a 
CRC 6500 rapid charger to charge any 
batteries other than a CORE

TM

 Outdoor 

Power CFC 6500 Power Cell. Charging 
other batteries may cause the batteries 
to burst, catch fire, emit hazardous 
fumes or explode. 

 

Do not allow the charger cord to hang 
over the edge of a table or counter, to 
be placed in an area where it can 
become entangled with moving objects, 
or be a tripping hazard, or to contact 
sharp or hot surfaces. The charger 
should be placed away from sinks and 
hot surfaces. 
 
Do not leave a Power Cell on a 
prolonged charge. Remove the Power  
Cell after attaining a complete recharge 
and unplug the charger when not in 
further use.

 
 
 
 

 

Do not operate the charger if the cord or 
plug is damaged. Have a qualified 
technician replace the damaged cord 
and plug immediately. 
 
Do not operate the charger if it has 
received a sharp blow, been dropped, 
crushed, cracked, punctured, immersed  
or splashed with water or other liquids, 
or otherwise damaged in any way. Have 
a qualified technician examine the 
charger and repair it if necessary. Do 
not disassemble or modify the charger. 
 

       WARNING:

 When the charger is 

plugged into the power supply, it can 
become shorted by foreign conductive 
material and cause sparks or fires. 
Foreign conductive material such as, 
but not limited to, metal shavings / 
chips, steel wool, aluminum foil, nails, 
staples, paper clips, should be kept 
away from charger ventilation openings, 
Power Cell retaining cavity and output 
terminals.   
 
Do NOT charge the Power Cell when 
the work area or the Power Cell 
temperature is at or below 0° C (32° F) 
or above 45° C (113° F). 

 

Unplug the charger when it is not in use 
and before cleaning or maintenance.

 

 
 

 
 

 
POWER CELL RECYCLING

 

To preserve our natural resources, and 
reduce landfill please recycle your 
Power Cells at participating retailers, or 
dispose of Power Cells properly in 
accordance with Federal, State, 
Provincial or local laws.

POWER CELL & CHARGER SAFETY 

INSTRUCTIONS 

NOTE:

 See Page 22 for detailed 

information concerning preparation 
for recycling power cells.  

!

Summary of Contents for GasLess CBP 420



































Reviews: