background image

11 

 

 
 
 
 
 
 
 

 
 
 
 
        

WARNING:

 Only use a CORE

TM

 

Outdoor Power CSC 6500-S standard 
charger or a CRC 6500 rapid charger 
to charge the CORE

TM

 Outdoor 

Power CFC – 6500 Power Cell. Using 
any other chargers to charge the 
CFC-6500 Power Cell may damage 
the Power Cell and / or the charger 
and cause fires, explosion, 
hazardous fumes and possibly burns 
or other serious injury. 
 

       WARNING:

 Fire Hazard.

 

 
Never expose the Power Cell to 
microwaves or high pressures. It may 
explode causing serious injury. 
 
Never attempt to open, modify, 
dismantle, reverse polarity, crush, 
puncture or shred the Power Cell for 
any reason.

 

 

Do not store or carry the Power Cell in a 
manner in which metal objects could 
contact the exposed metal terminals. 
Do not place the Power Cell in aprons, 
pockets, drawers, tool boxes, etc. with  
metal objects, such as, but not limited 
to, loose nails, screws, bolts, keys, 
coins, staples, foil, etc. Such metal 
objects could cause the Power Cell to 
short circuit causing fire, explosion, and 
hazardous fumes, resulting in personal 
injury or property damage. 
 
 
 
 
 

 
 
 
 
 
If the housing of the Power Cell breaks, 
cracks, swells, or is punctured 
immediately discontinue its use and do 
not recharge. 
 
Do not charge or use the Power Cell if it 
has been dropped or has received a 
sharp blow, a heavy weight has been 
imposed upon it, has been overheated, 
or is cracked, crushed, deformed or 
punctured. If a Power Cell has 
sustained damaged, (as per above, or 
otherwise) immediately isolate it in a 
non-combustible, safe outside area, 
remain a safe distance away but do not 
leave it unattended. Such a damaged 
Power Cell should be considered and 
treated as a potentially thermally 
unstable, flammable and hazardous 
material. If the Power Cell ignites use 
water spray, carbon dioxide, dry 
chemical or foam extinguishers to 
suppress. Avoid exposure to and 
inhalation of hazardous fumes. Contact 
hazardous materials authorities for 
guidance as to appropriate handling 
and prompt safe disposal of damaged 
Power Cells. Make arrangements for 
prompt safe disposal of a damaged 
Power Cell per local hazardous material 
regulations. 
 
Do not use or charge the Power Cell if it 
is wet or shows any evidence of 
corrosion. 
 

 

 

POWER CELL & CHARGER SAFETY 

INSTRUCTIONS 

NOTE:

  

Detailed instructions are packed with 
the Power Cell and Charger. 

Summary of Contents for GasLess CBP 420



































Reviews: