21
INSTALLING THE POWER CELL
Once the Power Cell has been fully
charged and you are ready to start
trimming, you will have to install the
Power Cell into the hedge trimmer.
Position the Power Cell (1) with the
"TOP" label (2) facing upward
(Fig. 6).
INSTALLING THE POWER CELL
Once the Power Cell has been fully
charged and you are ready to start
trimming, you will have to install the
Power Cell into the trimmer.
1. Position the Power Cell (1) with the
"TOP" label (2) facing upward
(Fig. 4).
Fig. 4
ASSEMBLY AND OPERATING
For safety reasons, the operator
must read the sections of this
Owner’s Manual entitled
"GENERAL SAFETY WARNINGS",
"GENERAL POWER TOOL
SAFETY WARNINGS", "SPECIFIC
SAFETY RULES", "POWER CELL
& CHARGER SAFETY
INSTRUCTIONS" and "SYMBOLS"
before using this hedge trimmer
accessory.
Verify the following every time the
hedge trimmer accessory is used:
1.
Safety glasses or goggles,
hearing protection device,
hearing protection and all
required safety clothing are
being worn.
2.
The area of operation is
cleared of all dangerous
debris such as broken glass
and free of materials that
could derive hazardous dust.
3.
Bystanders are at least 50'
(15 m) away from the
operation area.
Failure to observe these safety
rules will significantly increase
the risk of injury.
WARNING
!
Fig. 6