Page 12
20.
Use a 13mm open-ended wrench to
secure the console weldment to the
hotbar using two (2) of the M8 x 35mm
hex head fl ange screws.
Fig. 21
21.
Use a 6mm allen key to secure the top
mast bezel to the mast using two (2) M8
x 65mm socket head cap screws -
DO
NOT FULLY TIGHTEN.
Fig. 22
22.
Use a 6mm allen key to secure the
bottom mast bezel to the mast using
two (2) M8 x 65mm socket head cap
screws -
DO NOT FULLY TIGHTEN.
NOTE:
The bottom bezel needs to be
mated to the mast prior to the hardware
being installed.
Fig. 23
