Page 25
The following keys are used to modify SETTINGS:
Level Keys
Increase and Decrease Level Keys:
Display the next (Increase) and
previous (Decrease) parameters. Keys may also be used to enter the
desired value for the currently displayed parameter. Keys will repeat if
held.
Numeric Keypad
Numeric Keypad:
Facilitates entry of the desired value for the
displayed parameter. These keys do not save the new value.
OK Key:
(part of numeric keypad) Updates (saves) the value of the
displayed parameter in Flash memory. “UPDATING” will scroll once
across the PROFILE Window while the update is in process. When the
update is complete, the PROFILE Window will show the new value for
the parameter.
QUICK START
Button
Exits without saving any values or settings.
NOTE:
Unless otherwise specified, the Item (parameter) name is shown in the PROFILE Window, and the value
of the parameter is shown in the DISTANCE Window.
MANAGER MODE
The Manager Settings allow you to query and modify the basic settings of your treadmill. To enter Manager
Mode:
1.
Press and hold the
,
and
keys together.
2.
A beep will sound and “MANAGER SETTINGS” will scroll once across the PROFILE Window.
3.
Release all keys. “SN” will display in the PROFILE Window; the associated numeric value for the
parameter will display in the DISTANCE Window.
NOTE:
The system will automatically exit Manager Settings if no key is pressed for 30 seconds.
The items that you may display and change are:
Item
Lowest
Value
Highest
Value
Default
Notes
SN
0
9999
N/A
Serial Number. Crosstrainer serial number (set by factory).
DSW
1.0
99.99
N/A
Display Software. Display panel software version number (set by factory).
NOTE: Software checksum value is displayed in CALORIES Window;
Window; software Build value is displayed in TIME Window
OHR
0
9999
0
Operating Hours. Total operating hours.
DST
0
9999
0
Distance. Total distance traveled in miles or kilometers, based on current
UNx setting.
UNx
UNE
UNM
UNE
Units.UNE (English) = units of pounds, miles, feet, inches UNM (Metric) =
units of kilograms, kilometers, centimeters NOTE: Current value is shown
in PROFILE Window.
MAINTENANCE MODE