ML20700 PWI Series Mortise Lock
7
Copyright © 2009 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
4.
Install Lock Body into Door:
a. Feed wires through hole on INSIDE of door while installing lock body (Fig. 4a).
b. Pull wires through hole while inserting lockbody (Fig. 4b).
DO NOT push wires back into cylinder hole.
IMPORTANT
: Door must remain open during installation. Use door stop.
c.
Install, but do not tighten two #12 x 1” combination screws through lock body (Fig. 4b).
(2) #12 Comination Screws
Inside Face of Door
Fig. 4a
Fig. 4b
