9
Standard linking
The crossover internal jumpers do not have
to be removed (see page 12).
This is the standard solution to drive the
system by just one stereo amplifier.
Minimum installation time and components
are required for this solution.
Bi-Wiring linking
The crossover internal jumpers have to be
removed (see page 12).
The Bi-Wiring system (to link woofer and
tweeter by using two separate cables)
increase sound’s quality.
Also using different cable’s diameter or
type the sound can be adapted to your
own taste.
LINKING CHOICE
Before starting with installation, please take your time for a careful system choice and
planning: a car audio system can give the best performances only if correctly installed
and tuned.
Bi-Amping linking
The crossover internal jumpers have to be
removed (see page 12).
The Bi-Amping system (to drive tweeter
and woofer by two separate amplifiers)
allows more tuning flexibility and increase
sound’s quality and dynamics.
You can install two stereo amplifiers or one
4-channel amplifier, so that each amplifier’s
channel drives just one loudspeaker.
Both woofer and tweeter levels can be
adjusted directly on the amplifier.
