10
WOOFER MOUNTING
Check the mounting location carefully, to avoid that the woofer magnet does not interfere
with any electrical or mechanical devices.
Fix the woofers on a steady surface and, when it is possible, put a neoprene gasket
between them to eliminate air leakage. Installing high power and/or high quality audio
systems, damp the inside door’s metallic and plastic surfaces by specific dumping material.
WIRING
Before starting connections, turn off car radio, amplifier and all electrical devices in your
audio system, in order to avoid possible damages.
Link the system components to the amplifier(s) by using high quality speaker cables. Route
all wires through a protection grummet; don't put the cables close to electronic devices,
car wiring or heat-generating parts.
The wire gauge has to be adapted to the used power and to the cable length, as on
underneath table:
0
÷
2 meters
> 2 meters
50 watt rms
17 AWG / 1.1 mm
2
14 AWG / 2.2 mm
2
100 watt rms
14 AWG / 2.2 mm
2
14 AWG / 2.2 mm
2
150 watt rms
14 AWG / 2.2 mm
2
12 AWG / 3.3 mm
2
Different wire gauge for woofer and tweeter can be used.
