Coral Telecom SBDX, User Manual

Page: 20 / 73

SBDX – Hotel Ver. User Manual
Coral Telecom Ltd.
20
Paging
The system has a provision to interface with a public address system. You can have direct
access to the public address system by dialing a two-digit code to make announcements.
One number paging port is provided in the system.
To Page:
Step Action You Get
1. Lift the handset. Dial tone
2. Dial the access code of the paging. (default `81’). Confirmation tone
3. Announce the message.
4. Press RLS key or hang up.
Note
: SBDX has single paging port. This feature requires additional amplifier &
speakers.
Voice Paging
This feature can be used by the operator for activating a key phone remotely. The operator
can activate the speakerphone of the called key phone & start the conversation. The
speakerphone gets disconnected as soon as the operator disconnects. In case the operator
does not get a reply on activating the speakerphone, because of the absence of the user,
then operator can revert back to the ringing mode in order to draw the users attention if he is
nearby.
To activate the speakerphone after dialing a key phone extension:
Step Action You get
1. Lift the handset. Dial tone.
2. Dial the extension number. Ring back tone.
3. Dial code for speakerphone activation (default is ‘2’). Start conversation.
To revert back to ringing mode:
Step Action What happens
1
On activating the called key phone, if no answer
is found, dial the code for reverting back to
ringing mode. (default code is ‘1’).
Called extension start ringing
again.