7
INSTALLATION AT THE HOME
Suggested extra tools and items to have available during installation include:
Outlet power strip
Small step ladder
Cordless power drill
Ethernet cables
Wi
−
Fi repeater
319.5 MHz repeater (part number 80
−
922
−
1)
Magnetic strip (or remove and use magnet from Door/Window sensor)
Power Over Ethernet (POE) switch – Use for Outdoor Cameras
Step 1
Locate the Homeowner’s primary router and plug an Ethernet cable to the blue port on the back of the TP
−
Link router after it is powered up.
Step 2
Plug the transformer from the Côr panel to a power outlet after placement of the panel either using the wall mount or desk stand.
Step 3
Confirm the Côr panel is connected to the network.
If the Côr panel announces “IP is not ready”, login to the Côr panel using Wi
−
Fi Discovery. Otherwise, go to Step 4.
On a mobile device or tablet, go to Network Settings and enable Wi
−
Fi
Find and connect to “ZEROWIRE_xxxx”
Launch a web browser (Safari, Internet Explorer, etc.) and type in
192.168.1.3
in the address field at the top
Sign in as the installer
