SuperDVR & TDF Cards
44
4.5.3 Alarm
Output
Fig4.14 Alarm output
[Video Loss]: Users can select alarm output for this option. For example, users
select alarm_out1 and alarm_out3 and remote alarm for video loss.
Then video loss of any channel will trigger alarm_out1, alarm_out3 to
show red light in the Alarm output status panel (refer to Fig3.6 for
reference), and the system will give out related warning message to
the terminals in List of alarm output LAN terminals (refer to Fig 4.12)
[Disk Alarm]: when HDD available space is less than the set value (refer to
Fig4.9), it will trigger selected alarms.
[Sensor 1]: in case users have mounted sensors, when the sensors have been
activated, then it will trigger the selected output alarms.
[Sensor2] – [sensor16] 4CH card has maximum 4 sensors, 8CH card has
maximum 8 sensors, and 16CH card has maximum 16 sensors.
[Motion 1]: Users can set motion detection alarm output by different alarms and
remote alarm.
