RS422 SETUP
1 RS422/ID SEL: H/W
2 DOME ID: 001
3 PROTOCOL: PELCO-D
4 BAUD RATE: 2400
0 RETURN
RS422 Selection: H/W (hardware) and F/W (software) are selectable. It is effective to
set the communications when selecting F/W. Otherwise the dome communication is in
accordance with dial switches.
Dome ID: Range from 001 to 255.
Protocol: Support PELCO-D and PELCO-P.
Baud Rate: The baud rate is selectable from 1200bps to 9600bps.
NOTICE:
The change to communication setup will take effect after rebooting.
The communication of keyboard should be modified correspondingly.
4.2.4 Date Setup
Go to Main Menu
→
System Setup
→
Time Setup interface as below:
DATE SETUP
2012-06-01 12:00:00
CALL 1 TO STORED
CALL 2 TO CANCEL
①
Move the joystick of the controller in all four directions to select the desired
parameters.
②
Call 1 to save the setting.
Chapter 4 Menu Setup
11
4.2.5 Title Setup
The steps to set dome title are same with that of date setup. Please refer to section 4.2.4
for details.
Summary of Contents for CD7622-TVI-IR
Page 31: ...450011000583 A0 ...
