3.1 Startup and Shutdown
Before running your camera, please make sure all the connections are done correctly.
Startup: After the power supply is connected, the camera will be automatically started
up and then the system of the speed dome is going to self-check. The menu cannot be
operated until successful self-checking has done.
Shutdown: Disconnect the power cable.
3.2 Keyboard Setup
The address, communication protocol and baud rate of the keyboard should be consistent
with that of dome camera. Since different keyboards have different ways to set protocol,
please refer to relevant user manual of keyboard for details.
Panning and tilting: use the joystick of the controller
Controlling zoom: move the joystick clockwise (Tele) or counterclockwise (Wide)
OSD commands:
Joystick Up----move to the above menu
Joystick Down---- move to the below menu
Joystick Right----select the sub-menu/exit
Joystick Left----return to the previous menu and save the setting
Chapter 3 Basic Operation Guide
9
NOTICE:
Please refer to the user manual of keyboard for operation decription.
Call preset 95 to enter the main menu interface:
MAIN MENU
1 SYSTEM INFORMATION
↓
2 SYSTEM SETUP
↓
3 CAMERA SETUP
↓
4 PRESET SETUP
↓
5 DOME FUNCTION
↓
6 DISPLAY SETUP
↓
7 WIPER SETUP
8 LOAD DEFAULT
↓
0 EXIT
↓
NOTE
：
The arrow “
↓
”
icon means there is submenu to operate.
Summary of Contents for CD7622-TVI-IR
Page 31: ...450011000583 A0 ...
