-
１９
-
= >
？
, @\+,-. /
］
etc.
Ø
Clear header: Clear preset header setting.
Ø
Return to the previous menu.
Ø
AUTO SCAN
: to enter the Auto Scanning submenu
Ø
SCAN NO: to set the auto scanning number, maximum is 03.
Ø
SPEED: to set the scanning speed for each patrol.
Ø
SET START LIMIT: to set the start position of the scanning. After the user enter this item,
to use the joystick to move the dome camera and press “CLOSE” to save the current
position.
Ø
SET END LIMIT: to set the end position of the scanning. After the user enter this item, to
use the joystick to move the dome camera and press “CLOSE” to save the current
position.
Ø
RUN SCAN: to run the scanning function, Please set the start and end position first. And
if the start and end position are the same. The dome camera will
scanning for 360
°。
To press “CLOSE” to exit.
Ø
CLEAR SCAN: the clear the setting of the scanning, to press
“CLOSE” to exit.
Ø
RETURN: to return to the MOTION SETUP menu.
Ø
PATROLS
: to enter the submenu to set the patrols.
Ø
PATROL NO: to set the patrol number.
Ø
EDIT PATROL: to set the parameter of the patrol, after enter this
item, the monitor is as following:
Both top and bottom lines display prompt and information of each patrol is displayed on
1.< PRESETS >
2.
＜
AUTO SCAN
＞
3.
＜
PATROLS
＞
4.
＜
PATTERNS
＞
5.
＜
SCHEDULE
＞
MOTION SETUP
6.
＜
CLEAR
＞
7. EDIT DOME LABEL
8. RETURN
1. PATROL NO :
001
2. EDIT PATROL
3. RUN PATROL
4. CLEAR PATROL
5. RETURN
PATROLS
