-
１６
-
2.2
SYSTEM SETUP
Ø
SYSTEM INFORMATION
: to display the system information.
Ø
AUTO FLIP: to ON/OFF the dome 18
0
°a
u
t
o
f
l
i
p
.
Ø
PROP PAN SPD: to ON/OFF the proportional pan function.
Ø
RESERVED
：
This function seting also kept for thsi products.
Ø
ALARM SETUP:
Ø
ALARM NO: to select the alarm channel.
Ø
ACTION: to select the action after alarm. The ACTION could be
the preset “1-50”, PATROL 1, SCAN 1, PATT 1. The “1-50” are
the preset number, PATROL 1 is the patrol No.1, SCAN 1 is the
scanning No.1and the PATT 1 is the pattern No.1.
After 3 seconds
of the alarm function be cancelled ,it will return to the original
alarm station.
Ø
ALARM: to ON/OFF the alarm for each channel.
Ø
RETURN: to return to the SYSTEM SETUP menu.
Ø
RETURN: to return to the main menu.
2.3
DISPLAY SETUP
Ø
CAMERA ID:
when it is set at ON, address of dome camera
appears on the screen such as “CAM 001”. The default setting is
ON.
Ø
DISPLAY: to ON/OFF the dome address.
Ø
POSITION: to set the position of dome address, there are four
positions to be displayed: TOP-L (top-left corner), TOP-R
(top-right corner), BOTT-R (bottom-right corner) AND BOTT-L
(bottom-left corner).
SYSTEM SETUP
SYSTEM INFORMATION
1.SYSTEM INFORMATION
2.AUTO FLIP OFF
3.PROP PAN SPD OFF
4.RESERVED N/A
5.<ALAM SETUP>
6.RETURN
CAMERA SN:000000
CAMERA ID :001
PROTOCOL :P003
BAUD RATE :2400BPS
MODEL :S100P
VERSION :1.00
SYSTEM SETUP
1.ALARM NO: 001
2.ACTION: 001
3.ALARM ON
4.RETURN
1.SYSTEM INFORMATION
2.AUTO FLIP OFF
3.PROP PAN SPD OFF
4.RESERVED N/A
5.<ALAM SETUP>
6.RETURN
ALARM SETUP
1.<CAMERA ID>
2.<ANGLE DISPLAY>
3.<PRESET LABEL>
4.<DOME LABEL>
5.RETURN
1.DISPLAY ON
2.POSITION TOP-R
3.RETUTN
DISPLAY SETUP
CAMERA ID
1.<CAMERA ID>
2.<ANGLE DISPLAY>
3.<PRESET LABEL>
4.<DOME LABEL>
5.RETURN
1.DISPLAY ON
2.POSITION TOP
3.RETUTN
DISPLAY SETUP
ANGLE DISPLAY
